BBMC

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the old panes and put in new ones. In this case it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the door and the window is large, you might prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of issues, including sagging. A sagging uPVC window repair could cause issues with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism wearing out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close the window and then perform an initial test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, upvc window repair window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the old caulking might need to be removed before a fresh layer can be applied. It is important to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to note that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open in a breeze it could be hinges that are at fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process, but it's easier with someone else to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

The issue could be caused by opening the window improperly or a faulty installation in the factory. Sending us photos through our website can often solve the issue. We are always happy to provide assistance.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges may also become unbalanced due to wear, creating gaps where the sash and frame meet. If they are beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may be misaligned. Again, it's possible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also reduce the possibility of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window repairs sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and they may reach a point where it is more efficient to replace them than repair them. If you encounter any issues with your upvc window, it's best to consult an expert as soon as possible.