BBMC

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it very hazardous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass so that any shards fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from getting into your property until a professional is able to fix the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the distance between the door repairing and the window is large, you might prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors repairs are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems such as sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in place.

If you aren't able to move the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

UPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. The first step is to close your window and do an experiment to ensure that it fits. The corners of the sash should align with the casing joint. If it isn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open in a breeze it could be hinges at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to change a window hinge but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window improperly or a faulty installation at the factory. Sending us a picture through our website can often solve the issue. We are always happy to give assistance.

Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges, also because of wear and tear, may become displaced, which can cause a gap to form where the sash joins the frame. If they're beyond repair, it may be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it's possible to give them a good clean, but in some cases it might be necessary to get them replaced.

The next common reason for draughts are the window seals. They are susceptible to being worn out or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

One of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some kind of filler. They can be placed on the top of your windowsill. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it is more cost-effective to simply replace them rather than repair a window them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.